EasyManua.ls Logo

Planet GSD-1008HP - User Manual

Planet GSD-1008HP
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GSD-1008HP
1
Ethernet Data Transmit Distance Extension
The built-in solid DIP switch provides “Standard”, “VLAN” and “Extend”
operation modes. The GSD-1008HP operates as a normal IEEE 802.3at PoE+
switch in the “Standard” operation mode.
The “VLAN” operation mode features with port-based VLAN function that helps to
prevent the IP camera’s multicast or broadcast storm from inuencing each other.
In the “Extend” operation mode, the GSD-1008HP operates on a per-port basis at
10Mbps duplex operation but supports 30-watt PoE power output over a distance
of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this
brand-new feature, the GSD-1008HP provides an additional solution for 802.3at
PoE+ distance extension, thus saving the cost of Ethernet cable installation.
Furthermore, its VLAN isolation function isolates each port so as to prevent
broadcast storm and defend DHCP spoong in the “Extend” operation mode.
Flexible, Extendable and Centralized Power Distribution
PLANET GSD-1008HP provides eight 10/100/1000T ports featuring 30-watt
802.3at PoE+, a total 120-watt PoE budget and extra two uplink ports to fulfill
the demand of sufficient PoE power for HD IP surveillance and Wi-Fi system
in a small-scale but high-performance network. With the same desktop-sized
and compact metal housing, it makes the placement of the unit convenient and
provides a quick and easy PoE PDs deployment with power feeding.
8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T
Desktop Switch (120 watts)
Physical Port
• 10-port 10/100/1000BASE-T Gigabit Ethernet RJ45 copper
• 8-port IEEE 802.3at PoE+ Injector (Port-1 to Port-8)
Power over Ethernet
• Complies with IEEE 802.3at Power+ over Ethernet end-
span PSE
• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 30.8 watts for each PoE port
• Each port supports 55V DC power to PoE powered device
• 120-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100m in standard mode with
250m in extended mode
Switching
• Hardware-based 10/100/1000Mbps auto-negotiation and
auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for
half duplex operation
• IEEE 802.1Q VLAN transparency
• Hardware DIP switch for Standard, VLAN and Extend
mode selection; the Extend mode features 30-watt PoE
transmit distance of 250m at speed of 10Mbps and VLAN
isolation (Only for Port-1 to Port-8)
• Solid DIP switch to isolate ports to prevent broadcast storm
and defend DHCP spoong
Hardware
• 9-inch desktop size, 1U height, rack mountable
• LED indicators for system power, per port PoE ready and
PoE activity, speed, Link/Act
• Supports Energy-Efcient Ethernet (EEE) function (IEEE
802.3az)
Question and Answer IconNeed help?

Do you have a question about the Planet GSD-1008HP and is the answer not in the manual?

Planet GSD-1008HP Specifications

General IconGeneral
Total PoE Power Budget120 watts
Switching Capacity20 Gbps
MAC Address Table8K entries
Jumbo Frame9K bytes
Power ConsumptionMax. 130 watts/443 BTU
Packet Buffer Memory1.5Mb
Ports8 x 10/100/1000BASE-T
Forwarding Rate14.88Mpps
Operating Temperature0°C to 50°C
Storage Temperature-10~70 degrees C
Humidity5 - 95% (non-condensing)

Related product manuals