User Manual of IAP-1800AX & IAP-2400AX
- 119 -
5.3 iPhone/iPod Touch/iPad
In the following sections, the default SSID of the WDAP series is configured to “default”.
Step 1: Tap the [Settings] icon displayed in the home screen
Figure 5-3: iPhone – Settings icon
Step 2: Check Wi-Fi setting and select the available wireless network
(1) Tap [General] \ [Network]
(2) Tap [Wi-Fi]
If this is the first time to connect to the Industrial 802.11ax Wireless AP, it should show
“Not Connected”.
Figure 5-4: Wi-Fi Setting
To Next Page
Loading...
Need help?
General
