Frequently Asked Questions
Q1: How to connect the IPX-2500 IP PBX to the Internet
A1: If your office accesses the public network through router, you can put Planet IP PBX behind the router.
You should connect the WAN port of the IP PBX to the LAN port of the router.
Q2: How to combine two IPX-2500 IP PBXs in a different network
A2: Normally, two sets of the IPX-2500 are located in different places with different IP addresses for Internet
access.
For external line configuration, you must use public IP address.
Take the following instructions as an example:
Register IPX-2500-B IP to a trunk of IPX-2500-A with authentication.
Configuration Rule:
To Next Page
Need help?
General
