Planet SGS-6341-24T4X User Manual

37-302
Configure the BGP neighbor. The no command is used for deleting BGP neighbors.
Parameter:
<ip-address>: Neighbor IP address
<TAG>: Name of peer group
<as-id>: Neighbor AS number, ranging from 1 to 4294967295, it can be shown in decimal notation
(such as 6553700) or delimiter method (such as 100.100).
Default:
No neighbors
Command Mode:
BGP route mode and address-family mode
Usage Guide:
The BGP neighbors are completely generated through command configurations. A neighbor
relationship can only be really established by mutual configuring. Partner AS number should be
specified in configuration. The neighbor relationship can not be established when the AS number is
incorrect. The partner AS number is the same with that of local side inside the AS.
Example:
Configure 2 neighbor AS as 100 and 100.200.
Switch(config)#router bgp 200
Switch(config-router)# neighbor 10.1.1.64 remote-as 100
Switch(config-router)# neighbor 10.2.1.64 remote-as 100.200
37.67 neighbor remove-private-AS
Command:
neighbor {<ip-address>|<TAG>} remove-private-AS
no neighbor {<ip-address>|<TAG>} remove-private-AS
Function:
Configures whether remove the private AS number when sending to the neighbor.The “no
neighbor {<ip-address>|<TAG>} remove-private-AS” command cancels this configuration.
Parameter:
<ip-address>: Neighbor IP address
<TAG>: Name of peer group
Default:
Not configured
Command Mode:
BGP route mode and address-family mode
Usage Guide:

Planet SGS-6341-24T4X Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Form factor	1U
Certification	FCC Part 15 Class A, CE
Product color	Black
Console port	RJ-45
SFP+ module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	24
Routing entries	128
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Flash memory	16 MB
Internal memory	512 MB
Processor frequency	400 MHz
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	SNMPv3, SSH, SSL/TLS
Throughput	95.24 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply included	-
Power consumption (max)	19.9 W
Heat dissipation	67.91 BTU/h
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	240 mm
Width	440 mm
Height	43.6 mm
Weight	3170 g