Plantronics HL10 User Manual

www.plantronics.com
HL10 Handset
Lifter Accessory
USER GUIDE
© 2001-2006 Plantronics, Inc. All rights reserved. Plantronics, the logo design, and Sound Innovation are trademarks or registered
trademarks of Plantronics, Inc.
Patents U.S. D469,756; Australia 147229; France 651,857-651,865; Germany 40108524.4; GB Regd.Des.No. 2104923
Printed in USA 71233-01 (3/06)
345 ENCINAL STREET I SANTA CRUZ, CA 95060 USA I PHONE: 800 544 4660
Handset
Height
Switch
Accessory
Jack
Ringer Microphone Jack
(remove cover)
Mounting
Strips
Microphone
Mounting Strips
UNDERSIDE VIEW
RINGER MICROPHONE (if required)
Ringer
Microphone
Plug
Ringer
Microphone
COMPONENTS OF THE HL10 HANDSET LIFTER ACCESSORY
TOP VIEW
Lifter Power Cord
Nortel i2004
phones only
Stabilizers
EXTENDER ARM (if required)
IMPORTANT: Follow setup instructions carefully.
The HL10 Handset Lifter Accessory is designed to be used with a Plantronics Headset System. Please read these instructions to
setup and use your HL10. Make sure your Plantronics Headset Wireless System is fully charged.

Plantronics HL10 Specifications

General

Product color	Black
Harmonized System (HS) code	85177900

Summary

Adjusting the HL10 for Your Telephone

Adjusting Handset Height and Angle

Explains how to adjust the HL10 to three different heights and angles using the Handset Height Switch.

Mounting the HL10

Permanently Mounting the Lifter

Details the process of permanently attaching the HL10 to the telephone base after determining the correct position.

Making and Receiving Calls

Activating the Lifter for Calls

Explains how to use the headset's talk button to activate the HL10 for making and ending calls.

Troubleshooting Ring Detection

Important Safety Information

General Safety Precautions

Outlines essential safety guidelines for using the HL10 Handset Lifter Accessory to prevent injury or damage.

Operating Warnings

Highlights critical warnings regarding product usage, modifications, and environmental conditions.