Plantronics Savi WT100/T User Manual

Plantronics Savi User Guide 9
4.2 Making a test call
1 Remove handset from desk phone cradle.
2 With your headset on, press the call control button on
the headset.
3 Dial using your desk phone.
4 Adjust the master speaking volume on base to the
best setting for your listener. A setting that is too high can
produce an uncomfortable echo for you and a distorted sound
for your listener. A setting of 3 or 4 is ideal.
4 Configuration and test call
4.1 Checking configuration
1 Set volume on desk phone to mid-range.
2 Remove handset from desk phone cradle.
3 With your headset on, press the call control button on
the headset.
4 Listen for a normal dial tone. If you hear a dial tone and the
dial tone sounds normal, continue with Step 4.2 Making a test
call.
5 If you do not hear a dial tone or the dial tone is distorted,
adjust the configuration switch until the dial tone sounds
normal.
NOTE Multiple settings might work with your phone; however,
only one is the optimal position
5 Adjust the master listening volume on base. A setting of 2
or 3 is ideal.
6 You can also fine-tune the listening volume on the
headset by pushing the call control button up to increase
the volume and pushing down to decrease the volume.
NOTE Do not press the call control button in when adjusting the
volume; otherwise, the call can be ended accidentally.
7 To end the test call, press the call control button on the
headset.
8 Replace the handset in the desk phone cradle.
Configuration
switch
Master
listening
volume
Master speak-
ing volume

Plantronics Savi WT100/T Specifications

General

Brand	Plantronics
Model	Savi WT100/T
Category	Headsets
Language	English