EasyManua.ls Logo

Plantronics SHS1890 User Manual

Plantronics SHS1890
1 page
Page #1 background imageLoading...
Page #1 background image
SHS1890
ptt amplifier
© 2008 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Encore, SHS1980, Sound Innovation, Starset, SupraPlus and Tristar are trademarks or registered trademarks of Plantronics, Inc. Plantronics
does not endorse or sponsor any promotional offers made in this advertisement. Please contact the reseller directly with any questions related to promotional offers. Printed 05.08 SP54
HeleNeue 25 Ultra Light
27.5 pt 100.45.0.18
Complete Headset
(including H31CD capsule, 15-foot cord,
push-to-talk switch)
Net weight: 230 grams (8.1 oz.)
H31CD capsule only: 10 grams (.35 oz.)
Shipping weight: 490 grams (17.3 oz.)
Operating and Storage Ranges
Operating current range: 10 to 120 mA dc
Operating temperature: 0°C to 50°C (32°F to 122°F)
Storage temperature: -40°C to 66°C (-40° F to 151° F)
Microphone/Amplifier
Output level: -23.5 ± 5 dbV (37.6 to 119 mV RMS)
Frequency range: 300 to 3300 Hz
Distortion: < 5%, 300 to 3300 Hz
DC resistance: > 35 ohms
Impedance: 50 ohms
Polarity: Nonpolar
Terminal voltage: 2.3 Vdc @ 10 mA; 5.0 Vdc @ 100mA
Downward Expander Depth: 20 dB
Receiver
The SHS1890 allows the use of a wide variety of
receiver styles. In addition to the characteristics
listed in the table below, each receiver has the
following features:
Acoustic limiter: Solid-state limiting device across the
receiver transducer
Frequency range: 300 to 3300 Hz
Distortion: < 5%
Unless otherwise specified, all specifications are nominal, and
assume a 50 ohm resistive load with a bias of 4.8 V dc through
226.5 ohms, and an input of 94 db SPL at 1000 Hz into an
attached headset top. Specifications are subject to change.
SHS1890 Push-to-talk Amplifier
Features:
Allows the use of any H-series headset top in 6-wire controller
and dispatch operations
Push-to-talk switch with selectable locking or momentary operation
• PJ-7 (equivalent to WE-425) connector
• Choice of 3 different coil cord lengths
• CE compliant
Cable options available:
• SHS1890-10 10-foot coil cord
• SHS1890-15 15-foot coil cord
• SHS1890-25 25-foot coil cord
Plantronics also offers the SHS2310, which features 10 dB of receiver amplication.
PLANTRONICS
Receiver Characteristics of Tops Used with SHS1890 Push-to-talk Amplifier
Plantronics Top StarSet
®
III StarSet
®
III TriStar
®
SupraPlus
®
SupraPlus
®
Encore
®
Encore
®
H31CD H31/H31N H81/H81N Monaural Binaural Monaural Binaural
H251/H251N H261/H261N H91/H91N H101/H101N
1kHz sensitivity 20.5 19.5 22.0 14.0 9.0 wide band: 26.0 wide band: 19.5
(dBPa/V, ±4 dB) narrow band: 37.0 narrow band: 31.5
Receiver Impedance 600 ± 150 480 ± 50 450 ± 112.5 150 ± 37.5 300 ± 75 wide band: 205 ± 30.8 wide band: 395 ± 59.3
(ohms, at 1 kHz) narrow band: 250 ± 37.5 narrow band: 440 ± 66
Source Drive 600 10 10 10 10 10 10
Impedance (ohms)
Measuring Brüel & Kjaer Brüel & Kjaer Brüel & Kjaer Brüel & Kjaer Brüel & Kjaer Brüel & Kjaer Brüel & Kjaer
Device 4157 Ear 4157 Ear 4157 Ear 4157 Ear 4157 Ear 4157 Ear 4157 Ear
Simulator
1
Simulator
1
Simulator
1
Simulator
1
Simulator
1
Simulator
1
Simulator
1
Note 1: A proprietary Plantronics adapter is used with the specified Brüel & Kjaer measuring device.
For more information about the SHS1890
or other Plantronics products, please visit
our Web site at www.plantronics.com.
TEL: 800-544-4660 (USA AND CANADA)
831-458-7700 (OUTSIDE USA)
Product Specifications
SHS1890_PS_110810_B.indd 1 11/8/10 2:49:31 PM
Question and Answer IconNeed help?

Do you have a question about the Plantronics SHS1890 and is the answer not in the manual?

Plantronics SHS1890 Specifications

General IconGeneral
Quick DisconnectYes
Impedance32 ohms
Sensitivity110dB
Driver Size30mm
Cable Length1.2m
Connector3.5mm
Weight30g

Summary

SHS1890 Push-to-talk Amplifier Overview

Key Features

Highlights key features like H-series headset compatibility, PTT switch modes, connector type, and cord options.

Available Cable Options

Lists the available coil cord lengths for the SHS1890 push-to-talk amplifier: 10-foot, 15-foot, and 25-foot.

Product Specifications

Complete Headset Specifications

Details the headset weight, including the H31CD capsule, 15-foot cord, and push-to-talk switch.

Operating and Storage Ranges

Specifies the operating current range, operating temperature, and storage temperature for the device.

Microphone and Amplifier Specifications

Provides technical specifications for the microphone/amplifier, including output level, frequency range, and distortion.

Receiver Specifications

Outlines receiver characteristics such as acoustic limiter, frequency range, and distortion, supporting various headset styles.

Related product manuals