PlaSmart PlasmaCar - How it works; Safety Guidelines

2
How it works
The only power source the PlasmaCar requires is the seemingly limitless
energy of a child. The PlasmaCar can reach an exhilarating 10 km/hour
(6 mph).
Note: The PlasmaCar is not recommended for use on wooden floors.
The wheels may damage some floors.
1. Place the PlasmaCar on a smooth, flat surface.
2 Sit with the feet on the footrests, lean slightly forward, and grip the
steering wheel.
3. To propel the car forward, turn the steering wheel back and
forth continuously.
To go in reverse, rotate the steering wheel 180 degrees.
4. To bring the PlasmaCar to a stop, stop turning the wheel, wait for the car
to slow, and put your feet on the ground.
Safety Guidelines
The PlasmaCar meets or exceeds all International safety standards
including EN71, ASTM F963 and US CPSC.
Follow these safety guidelines:
• WhenunpackingthePlasmaCar,properlydisposeofallplasticwrappings.
• Adultsupervisionisstronglyrecommendedatalltimes.
• NeverusethePlasmaCarnearsteps,swimmingpools,orvehicletrafc.
• NeverusethePlasmaCaronahill,steepslope,oroverroughor
uneven surfaces.
• Topreventfalls,thechildshouldsitleaningslightlyforward.
• Protectiveequipment,suchasahelmet,recommended.
• Themaximumloadshouldnotexceed55kg(120lbs)onunevensurfaces,
or 100 kg (220 lbs) on smooth surfaces.
• Pleasekeepallrelevantinformationforfuturereference.
Warning:
Small parts.
Choking and suocation hazard.
Not recommended for
children under 36 months.
Warning:
Adult assembly required.
Keep away from children
until assembled.