Need help?Do you have a question about the Platinum Health Envyy Sleep to Stand Bed and is the answer not in the manual?
General| Brand | Platinum Health |
|---|---|
| Model | Envyy Sleep to Stand Bed |
| Category | Medical Equipment |
| Language | English |
Envyy Sleep to Stand Bed offers independent mobility with features like Zero Gravity and Lift-Chair egress.
Lift motors are not designed for continuous use. Continuous use shortens life expectancy and may void the warranty.
Product uses a polarized power cord and requires a grounded electrical outlet for proper and safe operation.
Product is designed to be maintenance free. Do not apply lubricant to any part.
A humming sound during operation is normal and related to room layout.
Standard warranty is 10 years for frame, 1 year for parts/labor. Contact for extended warranty.
Technicians are not responsible for moving furniture or removing items for maintenance.
Dispose of packing materials; keep children/pets away from bed during operation and assembly.
Consult physician if using pacemaker; massage feature may cause sensations similar to exercise.
Keep areas clear of limbs/pets/children when bed is raised to avoid serious injury or death.
Do not use with oxygen-therapy equipment or near combustible gases.
The bed's maximum weight allowance is 500 pounds, distributed evenly across the base.
Reset bed by unplugging for 10 seconds, then plugging back in and holding 'Lift Chair Down' for 30 seconds.
Attach legs to the bed base, turning the bed on its side for easier installation.
Insert the long side bed rails into their designated slots on the bed frame.
Secure side rails by pulling the knob and ensuring two bolts under slots engage.
Insert headboard and base board into correct slots, ensuring headboard is at the top.
Details on the control box, motor ends, and how components are color-coded for identification.
Illustrations show examples of various bed positions, which can be stopped at any point.
Contact customer service immediately at 888.550.2410 if parts are missing or the bed is not operating properly.
To Next Page