Need help?Do you have a question about the Platinum Spas VL400 and is the answer not in the manual?
Guidelines for choosing the right location for your hot tub.
Requirements for a flat, firm, and reinforced base for the hot tub.
Importance of 600mm access around the hot tub for maintenance.
Factors to consider for accessories, cover lifters, and steps.
Checking the route for delivery, including doorways and obstacles.
Information about delivery personnel and their capabilities.
Guidelines for ensuring electrical supply meets government regulations.
Explanation of Part P and requirements for qualified electricians.
Specific electrical needs for 13 AMP plug-and-play hot tubs.
Requirements for 32 AMP and 40 AMP hot tubs, including cabling and isolator.
Checking vehicle access, route, and obstructions for delivery.
Steps for filling the hot tub with water, including filter area usage.
How to safely turn on the spa after filling and checking for leaks.
Importance of balancing water chemistry before adding sanitizers.
Initial setup and priming mode for the control panel.
Explanation of Standard, Economy, and Sleep modes.
How to use the jet buttons for pump speed and operation.
How to set and display the spa water temperature.
How to operate the spa's internal lighting.
Meanings and troubleshooting steps for common error codes.
Recommended daily filtration cycles.
Water testing and adjustment advice.
Procedure for draining and refilling the hot tub.
How to drain the spa and precautions to take.
Instructions for cleaning and replacing hot tub filters.
Tips for vacuuming, headrest care, and cover maintenance.
Importance of a water care plan for spa health and safety.
Adjusting pH levels for optimal sanitizer performance.
Using shock treatment to manage organic waste and bacteria.
Using clarifiers to maintain crystal clear water by fighting particles.
Initial steps for dosing chemicals and shocking the water.
Reasons for shocking water: removing organics, killing bacteria, removing bromamines.
Step-by-step guide on how to properly shock your hot tub water.
Using test strips to check chemical levels and balance water.
How to adjust pH levels using pH Plus or pH Minus.
Importance of total alkalinity and how to adjust it.
Maintaining calcium hardness levels to prevent scale formation.
Using chlorine or bromine for sanitization and testing levels.
Common water problems, their causes, and solutions.
Steps for preparing your hot tub for short absences.
Detailed steps for preparing your hot tub for longer holidays.
Importance of preparing the spa to prevent winter damage.
List of items required for spa winterization.
Detailed procedure for winterizing the hot tub and its components.
Importance of regular servicing for spa health and component longevity.
Common spa problems, their likely causes, and troubleshooting solutions.
Information on how to log a warranty claim online.
General| Cabinet Material | Synthetic |
|---|---|
| Lighting | LED |
| Pump | 2 HP |
| Shell Material | Acrylic |
| Warranty | 5 years |
To Next Page
