GEMORO PLATINUM PRO501VXP 6
USA to Europe and beyond! Use of another type of
adaptor may permanently damage the scale, cause
a fire and void the warranty.
• Insert the female plug from the AC adaptor into the
scales male receptacle located on the right of the
scale and then plug the AC adaptors prongs into
the desired electrical wall outlet.
Battery Operation
• When removing the battery cover, be certain not to
apply excessive force or pressure onto the weighing
platform or damage may occur to the scales load
cell and void the warranty. To install new batteries,
remove the battery cover on the bottom of the
scale with caution as indicated above and place the
4 – AA alkaline batteries into the compartment as
indicated.
• Insert the battery cover back onto the battery
compartment when finished.
CALIBRATION PROCEDURE (Two-Point Calibration)
Once calibrated, the PRO501VXP should maintain its
calibration unless moved, bumped or the weighing
environment has changed. For best results, it is
advisable to check the calibration at regular intervals
by placing a known mass (weight) or the supplied
To Next Page
Loading...