3
INTRODUCTION
1. Read through the entire instruction booklet before you begin. is will enable you to exactly nd
out what is involved in installing your swimming pool before you begin.
2. DO NOT ATTEMPT THE INSTALLATION IN WINDY OR GUSTY WEATHER. is will
not only make your installation more dicult, it may result in damage to your pool before it is completely
installed.
3. Although we have broken down the installation into many simple steps, you will probably nd that
steps 1 to 4 will be the most labor-intensive and time-consuming. Once you have completed those four steps
you should nd that the rest of the installation moves along much more quickly.
4. Please be sure to review all the safety material and local codes before beginning your installation.
ere is a safety envelope packed with your pool. is envelope contains the safety material and warning
stickers to be placed on your pool. If you are missing any of these items, please contact your dealer or the
factory to obtain it. e warranty is void if all the safety precautions are not followed.
5. In the event you need to make a warranty claim, it is important to know about the size and model
of your swimming pool in order to expedite the handling of your claim. Please ll in the information below
and keep for your records. All of this information can be found on the labels attached to the cartons your pool
is packed in.
6. Make sure you have all the necessary tools and materials before beginning your installation. Below
is a list of the tools and materials needed.
7. e actual pool design may not be exactly as pictured on our web site or brochures. e Pool
Factory, Inc. reserves the right to change and/or alter its pool designs at any time without advance notice.
Use only professional pool installers and professional tools for installing the pool by
all means.
Tools and Materials Required:
• Excavator truck or rototiller, surveyor’s tripod and transit level, carpenter level, tape
measure, hand rake, ground shovel, round-pointed shovel, wheel barrel, electrical drill, 1/8”
drill bit, impact gun with torque adjustment, 1/4” hex head socket, pool sand, patio blocks,
duct tape, garden hose with a water hook up.
• Use a professional impact gun with torque adjustment for screwing all the self-tapping screws
all over the pool by all means to avoid stripping aluminum and loosening the self-tapping screws.
CONGRATULATIONS ON BECOMING THE OWNER OF A NEW SWIMMING POOL.
THESE ARE INSTRUCTIONS FOR INSTALLING YOUR SWIMMING POOL.
THE FOLLOWING ARE SOME HELPFUL HINTS YOU SHOULD TAKE INTO
CONSIDERATION BEFORE INSTALLING YOUR POOL.
To Next Page
Loading...