Others
Q: Warning occurs without lane departure.
▶Check the setting of warning timing. If set to earlier modes, the driver may feels
that the warning is too fast or occurs without crossing lines.
▶In case of bad weather, roads under construction or line-erased roads, Roadscope LX
may not recognize the road lines appropriately.
Q: Beep & Watch function is not operated.
▶This function is available when the vehicle is stopped. Make sure the vehicle is
completely stopped.
Please check that the color of ‘ready’ LED on the main unit is blue.
Q: The device gets hot sometimes.
▶In hot summer or under direct sun light, the device may get heat from the outside.
The internal electronic circuit and speaker may generate some heat even without a
breakdown. However, in case of preserving Roadscope LX without use, please keep
the device not exposed to sunlight directly.
To Next Page
Loading...