PLS Access EA Series User Manual

Daily Inspection Check List
Lift no:
Vehicle Reg:
Engineer’s Name: Date:
Customer Details:
Address, Contact:
Tel Number: OK
1 Visually check for any leaks or damage.
2 Check for obvious signs of damage, and notify as manager if necessary.
3 Ensure that the Operation instructions are visible.
4 Ensure the hand pump handle is present.
5
Ensure the Handset control is working correctly and there are no signs of
damage.
6 Ensure the Platform is clean and dry.
7 Ensure the Handrails are clean, working correctly and rust free.
8 Ensure the Arm guards are present and undamaged.
9 Ensure the Bridge Plate operates correctly and lands on the floor.
10 Ensure the Roll-Off-Ramp operates correctly and lands on the ground.
11
Ensure the warning lights are operating correctly before using the lift
(If fitted).
10.3 Daily Inspections Access™ EA & Access™ EAB
Service &
Maintenance
IF IN DOUBT, CONTACT THE MANUFACTURER
Lift Inspection checks are required on a DAILY basis by the lift operating company.
The working life of your lift will be greatly prolonged if these steps are adhered to.
This should include the following:
10
Service &
Maintenance
10
10.3 Daily Inspections Access™ EA & Access™ EAB

PLS Access EA Series Specifications

General

Brand	PLS
Model	Access EA Series
Category	Lifting Systems
Language	English