Basic Methods of Use
Description of basic usage.
The rotating scoop is moving with very strong force. Never touch an active scoop or put your hand
in the litter box.
This product does not have a power button.
Simply plug-in and power on.
At power-on, one LED lamp on the front of
the body lights up and becomes standby.
When the cat voids excrement, Circle O (Zero)
starts cleaning 7 minutes after the motion
sensor detects the exit movement.
Two LED lamps will illuminate during the
7 minutes countdown.
After 7 minutes countdown two LED lamps
will blink and start the cleaning cycle.
The clumps are filtered by the scoop and
thrown down to the waste bin.
When the operation is complete, the scoop
is returned to the fixed position (1 o'clock)
and placed on standby.
LED lamps returns stanby mode showing 1 light.
1 Light : Standby mode. 2 Lights : Counting down 7 minutes.
2 Flashing : Scoop is working. 3 Lights : Waste bin is full.
LED lamp
Motion Sensors
To Next Page
Loading...