Plymovent FUA-1300 User Manual (English)

Other manuals for Plymovent FUA-1300

Questions and Answers:

sandra22Aug 14, 2025

Why Plymovent FUA-1300 motor does not start?

R
Robin MoonAug 14, 2025
If the Plymovent Fan motor doesn't start, several issues could be the cause. First, ensure the mains voltage is connected. If that's not the problem, the mains cord might be defective and need repair or replacement. Also, check for loose contacts and repair them if necessary. If the issue persists, the motor protection switch might be defective, requiring replacement. Finally, the motor itself could be defective, in which case it should be repaired or replaced.

Jeremy PerkinsAug 17, 2025

How to improve the extraction capacity of my Plymovent Fan?

M
mcleanbrittanyAug 18, 2025
If your Plymovent Fan has poor extraction capacity, consider these possible causes: The direction of motor rotation might be inverted (for 3-phase motors), so change the rotation direction. The motor itself could be defective and may need repair or replacement. The fan might be polluted, requiring you to clean the fan blades. Also, check for extraction of false air and replace the sealing material if needed.

Airflow

1300 m³/h

Motor Power

0.37 kW

Voltage

230 V

Frequency

50 Hz

Power

0.37 kW

Speed

2800 RPM

Protection Class

IP55

Housing Material

Steel