To Next PageTo Next Page
Need help?Do you have a question about the PNI P15UV and is the answer not in the manual?
General| Output Power | 5W |
|---|---|
| Modulation | FM |
| Battery Capacity | 1500mAh |
| Power supply | 7.4V DC |
| Type | Portable |
| Frequency Range | 136-174MHz(VHF) & 400-470MHz(UHF) |
Safety precautions to avoid damage, injury, and ensure safe operation.
Specifies the VHF and UHF frequency bands the device operates on.
Reiterates the supported VHF and UHF frequency bands for operation.
Details output power, FM modulation, and adjacent channel power.
Details receiver sensitivity and other reception parameters.
Information on charging, capacity, and battery lifespan.
Critical safety instructions related to battery handling, charging, and disposal.
Identifies and labels the major external components of the radio.
Operation of power, volume, MENU, EXIT, FM/SOS, PTT keys.
Explains various icons displayed on the LCD screen for status and functions.
Detailed explanation of MENU key functions and navigation.
Procedure for powering on and off the device.
How to adjust the audio volume to the desired level.
Steps for making a call, including channel selection and PTT usage.
Explanation of the differences and uses between VFO and MR modes.
How to navigate and manually input frequencies in VFO mode.
How to initiate frequency scanning in VFO mode.
How to activate, use, and exit the FM Radio function.
How to send repeater tones using specific key combinations.
How to store frequently used frequencies into memory.
Explanation of the differences and uses between VFO and MR modes.
A practical example of programming a repeater channel with CTCSS.
Instructions for programming repeater frequencies and settings.
How to set offset direction and optional CTCSS tones.
How to test repeater connection and resolve related issues.
General instructions on how to navigate and use the device's menu system.
Explanation of squelch levels and their effects on reception.
How to adjust the frequency step in VFO mode.
How to select transmission power and configure power saving modes.
How to adjust VOX sensitivity levels.
How to configure scanning behavior (Time, Carrier, Search).
How to enable Busy Channel Lockout to prevent interference.
How to enable automatic locking of the keypad after inactivity.
How to set the direction of frequency offset.
Steps to resolve issues with powering on the device.
Solutions for weak or intermittent reception.
Troubleshooting steps for problems communicating with other users.
How to resolve issues with background noises and unwanted sounds.
How to fix the issue of the radio broadcasting continuously.
