11363 R01 1000207
CALIBRATION GUIDE
DIGITALVEHICLECOMPASS
V6000c
V7000
5. Press
to select value
ft
Calibrating the altitude (continued)
Alt.set feature
Daily weather changes can cause
changes in altitude readings, even
if your vehicle has not moved.
Use the Alt.set feature as often as
possible and no less than once a
day to reset altitude back to the
value set in altitude mode.
The second digit from the left
starts ashing. Repeat sequence
until all 5 digits have been
assigned values then proceed
with the step below
6. Press
to exit to normal
display mode
ft
ALTITUDE
1. Press
to toggle line 3
display to altitude
ft
ALTITUDE
2. Hold
The preset altitude value displays
ft
ALTITUDE
That’s it!
What is compass calibration?
Compass calibration allows the Waynder to
separate the earth’s eld from the magnetic elds
generated by your vehicle. Without calibration,
the unit displays inaccurate readings.
When do I calibrate the compass?
• When used for the rst time in a vehicle.
• When moved to a different location in the
same vehicle.
• When moved to a different vehicle.
• When the battery is removed (unless supplied
12-volt power source).
• When there has been a change to your vehicle
(ex. new stereo installation).
• When the degree symbol ashes continously,
indicating distortion.
To Next Page
Need help?
General
