CHAPTER 1 - Introduction
Congratulations on the purchase of your graphics accelerator card by PNY
Technologies. You are now the owner of a state-of-the-art video adapter that
offers features and functionality beyond any other graphics card in its class.
We recommend that you read through the Installation Guide before installing
your video card to ensure that the installation process goes smoothly.
Minimum System Requirements:
• Intel Pentium
®
III, AMD Athlon™ or Duron™ class processor or higher
• 128MB system RAM
• 250W system power supply
• One available AGP 2.0 or 3.0 compliant slot or better, or one available PCI
slot (as required for your specific card)
• 17MB of available hard disk space (50MB for full installation)
• CD-ROM or DVD-ROM drive
• Microsoft
®
Windows
®
95 (OSR2), 98, Me, 2000, XP or Windows
®
NT4.0
(Service Pack 5 or higher)
• VGA compatible monitor
Package Contents:
Please check your VGA package, which contains the items below. If you
find any damaged or missing items, please contact your dealer.
• Verto
®
GeForce™ graphics card
• This Installation Guide
• CD-ROM: NVIDIA
®
GeForce™ drivers for Microsoft
®
Windows
®
95/98/Me/2000/XP/NT4.0, Microsoft
®
DirectX
®
8 and DirectX
®
9.
• S-Video cable
Before You Begin
• Before installing the Display driver of your PNY card, make sure your Windows
®
95/98/2000/ME/XP or NT was installed in VGA mode and functions properly.
• To use an AGP graphics card with Windows
®
NT4.0, you may need to re-install NT
with Service Pack 5 (SP5) or Service Pack 6 (SP6) before installing the AGP card.
• If you are running Windows
®
NT4.0, please note that some drivers are not
compatible with earlier releases of Windows
®
NT. Consult your dealer or
local support to ensure you have the most recent releases for Windows
®
NT and the drivers.
2 - GIV 51-03 V1.5
To Next Page
Loading...