v3.2 - first draft - added USB & concurrent wireless transport mode
v3.3 - second draft - added E/H/W/N Wiz to product suite
v3.4 – first release - edits
v3.5 – summary specification added
v4.0 – Summary, PC Commands: Electrode Impedance Measurement, Electrode off detection
v4.1 – Commanding the Wiz: BioExplorer, BioEra, Wiz Central
1 Quick Start
• Install PC Application (BioExplorer, BioEra etc) - needs to be latest version, see copy on CD
• plug Q/E/H-wiz into USN port and allow Windows to search for Pocket Neurobics driver in it's
on-line repository
• or, for W/N-wiz, plug PN wireless dongle into USB port
• as part of the Windows driver installation procedure, note the COM port number assigned to
the Pocket Neurobics device by Windows
• only if driver installation fails, try the manual driver executable on the PN CD under 'utilities'
• transfer illustrative BioExplorer and BioEra designs into respective directories on your PC
• transfer media resources, video and audio files, into respective directories on your PC
• open the PC Application, go to Device Configuration, enable the "PN Wiz" driver, and
configure it for the COM port assigned by Windows
• open the illustrative design "Wiz_Test"
With successful installation, the Application should show the Wiz's start-up test sequence for the seconds
immediately after it is powered on. This is, for ExG channels, four tones, each of one second duration, of 4, 8,
16 and 32Hz., and for HEG channels values alternating about the nominal value of 100, namely 99.0 and
101.0, each for 1 second duration.
2 Sections
Table of Contents
1 Quick Start.........................................................................................................................................1
2Sections...............................................................................................................................................1
3Summary.............................................................................................................................................2
4Important Information........................................................................................................................3
5 Feature Set ........................................................................................................................................4
6 Overview...........................................................................................................................................4
7Buttons................................................................................................................................................6
8LED Indicators...................................................................................................................................9
9Connecting to PC: Wireless and USB Transport.............................................................................11
10 Modes............................................................................................................................................12
11 EEG Electrode Interface................................................................................................................12
To Next Page
Need help?
General