-1.3 1/32 + 0.7 1/32 + 0.7 1/128 + 0.7
-1.7 1/32 + 0.3 1/32 + 0.3 1/128 + 0.3
-2 1/32 1/32 1/128
-2.3 1/64 + 0.7 1/32 1/128
-2.7 1/64 + 0.3 1/32 1/128
-3 1/64 1/32 1/128
Specifications
Compatiblity
Canon E-TTL II OR Nikon CLS/i-TTL
Elinchrom RX, AlienBees, White Lightning, Einstein™ E640 Flash
Mounting Hot Shoe
Selector Switch Off, Manual, Auto (PowerTracking, E-TTL II, CLS/i-TTL)
Adjustment Range Auto = +/- 3 stops, 1/3 stop increments
Status Indicator LED: Green status indicator
Operating Temperature Above -15° C (5° F) and below 50° C (120° F)
Storage Temperature Above -30° C (22° F) and below 85° C (185° F)
Construction high impact plastic - RoHS Compliant
Power Receives power from attached radio
Dimensions 2" (5cm) wide x 1.7" (4.2 cm) long x .9" (2.1cm) tall
Weight .82 ounces (23.25 grams)
Requirements
Dedicated AC3 Version for Nikon and Canon systems. Must be used in
conjunction with a MiniTT1 or FlexTT5 on camera.
Power Control for Non-Compatible Cameras
You can use your MiniTT1 or FlexTT5 with an AC3 ZoneController on nearly *any* camera with a
basic hot shoe to get Manual Power Control for Mamiya, Leica, Hassleblad, mirrorless cameras, etc.
Trigger any ControlTL receiver in sync up to 1/125 on some models of camera.
You can read more about this exciting feature on our Power Control for Non-Compatible Cameras
page.
To Previous Page
Loading...