8
Manual manoeuvre of the electrical keel system :
In case of an energy breakdown, you can manually activate the keel to put it in top or low position.
To do so :
Open the central table in order to have access to the hydraulic central.
Take the arm tube
Put it in the manual pump (see pict. below)
To get the keel down: clip the spring on the starboard spherical button in order to maintain it firmly
pushed, and then pump (see pict. below)
To get the keel up: clip the spring on the portside spherical button in order to maintain it firmly
pushed, and then pump (see pict. below)
Only push one button at the time. In normal conditions, both buttons must be free of the springs.
To Next Page
Loading...
