Need help?Do you have a question about the Poindus VariPOS 715S and is the answer not in the manual?
General| Operating System | Windows 10 IoT |
|---|---|
| Certifications | CE, FCC, RoHS |
| Display Size | 15 inch |
| Touch Technology | Projected Capacitive |
| RAM | 4 GB |
| Storage | 64GB SSD |
| Connectivity | Wi-Fi, Bluetooth |
| Ports | USB 3.0, USB 2.0, HDMI, Ethernet |
| Power Supply | 12V DC |
Crucial instructions for safe operation and handling of the product.
Certificate of compliance for electromagnetic compatibility and low voltage directives.
Verification of product compliance with FCC rules for emissions.
Lists and illustrates all items included in the product packaging.
Identifies and labels key components visible from the front of the device.
Shows the rear of the device and details the standard input/output ports.
Steps for installing and configuring touch screen drivers on the system.
Instructions for calibrating the touch screen for accurate input.
Explains touch gestures and provides guidelines for cleaning the touch screen.
Instructions to update BIOS and configure XHCI/EHCI controllers for USB 3.0.
Procedure for installing the USB 3.0 driver in Windows 7 and final BIOS adjustments.
Details of the motherboard, CPU, chipset, and system memory.
Information on the TFT LCD, touch screen, and storage options.
List of external input/output ports and their specifications.
Details on internal connectors, compliance, OS support, and management features.
Power supply specs, dimensions, weight, mounting, and temperature ranges.
List of product certifications obtained (CE, FCC, RoHS).
Step-by-step guide on how to disassemble the system to access internal components.
Instructions on how to remove and replace the Hard Disk Drive (HDD).
Details of screws used in the assembly and their part numbers.
Step-by-step instructions for attaching and connecting a customer display.
Procedures for connecting and mounting a secondary display unit.
How to set power output for COM ports and configure VGA power in BIOS.
Steps to set up the resolution for a secondary display.
Instructions for connecting a cash drawer, pin assignment, and control commands.
Steps for connecting the Magnetic Stripe Reader and I-Button reader.
Instructions for attaching the aluminum base to the system.
Diagram showing the placement of connectors and components on the motherboard.
Details on various connectors, jumpers, and their functions, including cash drawer settings.
To Next Page
