Point Mobile PM95 - Device Parts Identification

7
LED Indicator
2
1
No
Indicator
Status
Indication
1
Power
LED
Solid
green
Device
is fully charged
Solid
red
Charging
the device
/
Battery is low
Blinking
red
Charging temperature is out of
normal range
/ Battery is very low
Alternately blinking
red
& green
Cannot
recognize the battery
2
Notification
LED
Blinking
blue
Notification
existing
Red
flash
Barcode
reading failed
Blue
flash
Barcode
reading success
Scan a Barcode
Center the cross-hair aimer or red dot aimer over the barcode. You
can tilt the aimer slightly for a comfortable angle to scan.
Scanner is disabled by default, so enable the scanner from
ScanSettings first.
Check if the scanner icon is placed on the Status bar. Then,
press a scan button on the device to scan a barcode.
< Notice > Scanner is equipped on scanner SKU and MSR/ICCR SKU.