● Insert the smaller USB connector into the socket
at the bottom of the hair clipper and the larger
connector into the selected power source.
● The battery symbol and 3 battery capacity
indicators will run in turn when being charged.
● When battery capacity reaches 5% during the
charging process, the battery symbol will
illuminate permanently. When battery capacity
reaches 25%, the lowest battery capacity indicator
will illuminate permanently. When battery
capacity reaches 50%, the middle battery capacity
indicator will illuminate permanently. When
battery is fully charged, battery symbol and all
battery capacity indicators will illuminate
permanently. Disconnect the power cord from the
hair clipper and from the power source.
●
battery power level. If the battery is completely
CHARGING
Note: The selected power source must have an
output of 5VDC, 1000 mA.
The hair clipper can be charged in two ways:
- By means of an external device with a USB port
(e.g. computer, USB hub, power bank, etc.)
- By means of a standard USB adapter (not provided)
connected to a power socket.
10
To Next Page
Loading...