before cleaning.
1. The Comb Attachments should be cleaned in
running water. Ensure they are completely dry
before using them.
2. Clean the blades with the Cleaning Brush provided
to remove remaining loose hair clippings.
3. Clean the housing of the hair clipper with a soft, dry
cloth.
4. The cutting blades should be lightly oiled with the
oil provided once every few haircuts.
13
LOCK AND UNLOCK FUNCTION
switch button for 3 seconds to lock the device, the
switch button for 3 seconds again to unlock the device.
MAINTENANCE
DO NOT use any harsh detergents, abrasives, solvents
or cleaners. NEVER immerse in water to clean. Dry
thoroughly before use.
The appliance should never be stored whilst hot or
whilst still connected to the mains. Always ensure the
and has cooled down before storing.
To Next Page
Loading...