19
2. Microwave Cooking
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your cooking needs.
When the microwave oven is on, it will display "WELCOME", and the buzzer will ring once.
If there is no operation within 1 minute, it will enter waiting state and "0:00" will be displayed.
3) Press the " Kitchen Timer/Clock " button or the " Start/+30Sec./Confirm " button
to confirm, the minute figures will flash.
5) Press the " Kitchen Timer/Clock " button or the " " button
to finish clock setting. ":" will flash. The current time will be displayed.
Note : 1) If the clock is not set, it will not function when the microwave oven is
powered on.
1) Press the " Kitchen Timer/Clock " button twice, the screen will display "00:00" and the
OPERATION INSTRUCTION
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave Power Chart
1) Press the " Microwave " button once, "P100" will be displayed.
2) Press the " Microwave " button to select the
microwave power.
"P100", "P80", "P50", "P30", "P10" will be displayed in that order.
2) Press the " "or " " button to adjust the hour figures,the input time should be
within 0--23.
Microwave Power
Display
P100 P80 P50 P30 P10
1.Clock Setting
4) Turn the " "or " " button to adjust the minute figures, the input time should
be within 0--59.
repeatedl y
(The maximum cooking time is 95 minutes)
High Med.High Med.
Med.Low Low
hour figures will flash;
3) Press the " " or " " button to adjust the cooking time.
4) Press the "
0---1 min : 5 seconds
" button to start cooking.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
GB
To Next Page
Loading...
