an easily accessible mains
socket which has a voltage that
corresponds to that indicated on
the type plate.
■ Take o the blade cover (13)
(see Fig. J).
■ Switch the product on using the
ON / OFF button (3).
Using the product without the
power adapter (battery
operation)
■ Make sure that the battery is
charged (see chapter ‘Charging ’)
and switch the product o using
the ON / OFF button (3).
■ Unplug the power adapter (9)
from the socket and disconnect
the connector plug (8) from the
power socket (7) .
■ Take o the blade cover (14)
(see Fig. J).
■ Switch the product on using the
ON / OFF button (3).
Transport lock
If the transport lock is activated, the
lock symbol (10) lights up for a few
seconds when a button is pressed.
■ Press and hold the ON / OFF
button (3) for approx. 3 seconds
to activate / deactivate the
transport lock. The lock
symbol (10) will flash three times.
■ Connecting the power adapter (9)
deactivates the transport lock.
13
To Next Page
Loading...