To Next PageTo Next Page
Need help?Do you have a question about the POK Turbokador 500 and is the answer not in the manual?
Read this manual before using the equipment and follow safety rules.
Details warranty terms, rules for dismantling, and using spare parts.
Respect technical limits, safety instructions, and pre-use checks for the fire nozzle.
Specifies maximum operating pressure (PN 16) and resistance limit (25.5 bar).
Illustrates the fire nozzle with numbered parts and their designations.
Details construction materials, hydraulic specs like flow rates, and mechanical features.
Covers general data, flow chart, and mechanical system details as per the standard.
Details compliance with standard EN 15182-2 for handling, performance, and physics.
Shows diagrams with measurements of the fire nozzle and its weight.
Steps to check before connecting the nozzle to a water supply.
Guidance on using the shutoff valve, adjusting flow rate, and changing stream patterns.
Routine checks before and after each use for damage and proper function.
Troubleshooting for leaks or stiffness in the inlet coupling.
Troubleshooting for leaks or stiffness in the shutoff mechanism.
Troubleshooting for a flow pattern ring that doesn't turn or spinning teeth.
Information on ordering spare parts and proper storage conditions.
Recommended procedures for cleaning the nozzle after use and annually.
Diagram showing all components of the fire nozzle with reference numbers.
List of all parts with their mark, quantity, designation, and reference number.
General