Polaris 2009 Sportsman XP 850 - Page 271

10.15
STEERING / SUSPENSION
10
is properly seated.
2. After the new ball joint is installed into the A-arm, install
a new retaining ring.
3. Reinstall the A-arm (see “FRONT A-ARMS - Removal /
Replacement”).
4. Repeat the ball joint service procedure for any additional
A-arm ball joint replacements.
Press into the A-arm
in this direction
Upper A-arm Shown
Place driver HERE
to support A-arm
PartShark.com
877-999-5686