31
FEATURES AND CONTROLS
Multifunction Light
Multifunction Light Troubleshooting Guide
Flash
Sequence
Solution
OFF If the light does not illuminate, verify that the master on/off
switch is in the ON position. Check battery cable connections.
1 Flash The system controller has an internal error. See your Polaris
dealer for service.
2 Flashes Move the master on/off switch to OFF. Inspect electrical con-
nections to the direction selector switch. Return the master on/
off switch to ON. If the light continues to flash, see your Polaris
dealer for service.
3 Flashes Move the master on/off switch to OFF. Inspect electrical con-
nections to the motor. Return the master on/off switch to ON. If
the light continues to flash, see your Polaris dealer for service.
4 Flashes The line contactor requires service. See your Polaris dealer for
service.
6 Flashes Move the master on/off switch to OFF. Inspect electrical con-
nections to the accelerator pedal. Return the master on/off
switch to ON. If the light continues to flash, see your Polaris
dealer for service.
7 Flashes Battery voltage is low. Move the master on/off switch to OFF.
Check battery cable connections. Return the master on/off
switch to ON. If the light continues to flash, move the master
on/off switch to OFF and use a battery tester to check each bat-
tery.
To Next Page
Loading...