101
MAINTENANCE
Brakes
Brake Fluid
1. Position the vehicle on a level surface.
2. Open the hood. The brake fluid reservoir is
located on the driver’s side of the vehicle, above
and to the rear of the front tire.
3. View the brake fluid level in the reservoir. The
level should be between the upper (MAX) and
lower (MIN) level lines.
4. If the fluid level is lower than the upper level
line, add brake fluid to the upper (MAX) line.
5. Apply the brake forcefully for a few seconds and check for fluid leakage around the
fittings.
NOTICE: Brake fluid may cause damage to painted and finished surfaces. Use caution when refilling
the brake fluid reservoir.
To Next Page
Loading...