111
MAINTENANCE
Tires
Wheel Removal
4. Block both the front and rear of the tire that is located diagonally opposite the jacking
position. For example, if the right front tire is being changed, block the left rear wheel.
5. Use a small floor style jack or low profile scissors jack only. Jack the vehicle only from
the side of the vehicle, on the main frame rail, at the point where the tub or floor panel
support and the main frame rail are welded. Alternative locations include the rear frame
rail and the center of the front cross member.
NOTICE: Jacking at any location other than the recommended jacking points may cause significant
damage to the vehicle frame and body.
6. Remove the wheel nuts.
7. Remove the wheel.
To Next Page
Loading...
Need help?
General
