44
FEATURES AND CONTROLS
Digital/Analog Gauge
Rider Information Center
The rider information center is located in the
instrument cluster. The information center is
set to display standard units of measurement
and a 12-hour clock at the factory. To change
to metric and/or a 24-hour clock, see page 47.
Information Display
This area will display clock, odometer, trip
meter, state of charge (SOC), range meter,
efficiency rate (EFF) or any existing fault
codes or warning messages. See page 47.
Miles/Kilometers Indicator
The miles or kilometers indicator illuminates to indicate the mode of measurement selected.
To Next Page
Loading...
Need help?
General
