47
FEATURES AND CONTROLS
Digital/Analog Gauge
Rider Information Center
Information Display Mode
This area will display clock, odometer, trip meter, state of charge (SOC), range meter,
efficiency rate (EFF) or any existing fault codes or warning messages.
The display can be changed to show either standard or metric units of measurement for each
of the following settings.
Tip: To exit the set-up mode, turn the key off. Wait 5 seconds, then turn the key on. The gauge displays
the mode that was displayed prior to setting the units.
Standard Display Metric Display
Distance Miles Kilometers
Temperature Fahrenheit Celsius
Time 12-Hour Clock 24-Hour Clock
To Next Page
Loading...
Need help?
General
