77
FEATURES AND CONTROLS
Seat Belts
Proper Seat Belt Use
This vehicle is equipped with three-point lap and diagonal seat belts for all occupants.
Always make sure the seat belts are secured for operator and all passengers before operating.
When the key is turned on, the seat belt indicator lamp will
illuminate if the driver’s seat belt is not fastened.
To wear the seat belt properly, follow this procedure:
1. Pull the seat belt latch downward and across your chest
toward the buckle at the inner edge of the seat.
2. Slide the buckle up the webbing as far as needed for the
belt to reach across your hips. The belt should fit snugly
across your hips and diagonally across your chest.
Make sure the belt is not twisted.
To Next Page
Loading...
Need help?
General
