EasyManuals Logo

Polaris 50 outlaw User Manual

Polaris 50 outlaw
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
70
Operation
Failure to operate the ATV properly can result in a collision, loss of control, accident or overturn, which
may result in serious injury or death. Read and understand all safety warnings outlined in the safety
section of this owner’s manual.
Break-in Period
The break-in period for your new Polaris 4-cycle ATV is defined as the first ten hours of
operation, or the time it takes to use the first two full tanks of gasoline. No single action on
your part is as important as following the procedures for a proper break-in. Careful treatment
of a new engine will result in more efficient performance and longer life for the engine. Per-
form the following procedures carefully.
NOTICE: Excessive heat build-up during the first three hours of operation will damage close-fitted
engine parts. Do not operate at full throttle or high speeds for extended periods during the
first three hours of use.
Mixing brands or using a non-recommended oil may cause serious engine damage. Always
use the recommended oil. Never substitute or mix oil brands.
WARNING

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 50 outlaw and is the answer not in the manual?

Polaris 50 outlaw Specifications

General IconGeneral
BrandPolaris
Model50 outlaw
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals