Name: Polaris 600 INDY 2013
Brand: Polaris
Rating: 4 (1 reviews)

To Next Page

To Previous Page

MAINTENANCE

Track Maintenance

WARNING! Moving parts can cut and crush body parts. When performing the

checks and adjustments recommended on the following pages, stay clear of all

moving parts. Never perform track measurement or adjustments with the engine

running.

Track Tension

Track adjustment is critical for proper handling. Always maintain cor-

rect tension and alignment.

TIP:Tension adjustments should be made only after the track is warmed up and

limber.

1. Turn the engine off.

2. Lift the rear of the snowmobile and safely support it off the ground.

3. Place the recommended weight or downward pressure on the track

at the specified distance (see chart) ahead of the center of the rear

idler wheel.

4. Measure at the point where the weight is hanging.

TRACK TENSION DATA CHART

Suspension Weight

Measurement

Location

Slack

Measurement

INDY (121) 10 lbs. (4.54 kg) 16 in. (40 cm)

ahead of rear

idler shaft

7/8-1 1/8 in.

(2.2-2.9 cm)

Questions and Answers:

Need help?

Do you have a question about the Polaris 600 INDY 2013 and is the answer not in the manual?

Polaris 600 INDY 2013 Specifications

General