EasyManuals Logo

Polaris 600 INDY 2013 User Manual

Polaris 600 INDY 2013
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
82
MAINTENANCE
Spark Plugs
Spark Plug Recommendations
A new engine can cause temporary spark plug fouling due to the preser-
vative added during the assembly process. Avoid prolonged idle speeds,
which cause plug fouling and carbonization.
Refer to the specifications section for the specific spark plug to be used
in your snowmobile.
Change the spark plugs at the intervals outlined in the Periodic Mainte-
nance Table beginning on page 75.
Use recommended spark plugs with the proper gap.
Use only resistor-type spark plugs.
Torque spark plugs to 18-22 ft. lbs. (24-30 Nm).
Always carry spare spark plugs.
NOTICE: Using non-recommended spark plugs can result in serious engine
damage. A spark plug with a heat range too high will always cause
engine damage if the engine is operated in conditions more severe
than intended for that plug. Always use the spark plugs recommended
for your snowmobile. See your Owner’s Manual Supplement.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 600 INDY 2013 and is the answer not in the manual?

Polaris 600 INDY 2013 Specifications

General IconGeneral
Displacement599 cc
Bore x Stroke77.25 mm x 64 mm
Front SuspensionPRO-RIDE
Track Width15 inches
Track Length121 inches
Cooling SystemLiquid
StarterElectric
Suspension FrontPRO-RIDE
Brake TypeHydraulic Disc
Length114 inches
Width48 inches
Track Height1.25 inches
CarburetionDual VM34 Mikuni carburetors
Height46 in. (116.8 cm)

Related product manuals