Polaris 800 PRO-RMK 2011 User Manual

72
MAINTENANCE
Periodic Maintenance Interval Table
I - Inspect (clean, adjust, tighten, lubricate, replace if necessary)
C - Clean R - Replace L - Lubricate
Bolt Torque Inspection
To maintain proper chassis performance, see your POLARIS dealer for
a bolt torque inspection every 1000 miles (1600 km).
Item See
Page
Frequency
150 mi.
(240 km)
500 mi.
(800 km)
1000 mi.
(1600 km)
2000 mi.
(3200 km)
Pre-
Season
CHASSIS
Ski Toe Alignment -- III
Suspension Mounting
Bolts
-- III II
Bolt Torques See your dealer every 1000 mi. (1600 km) for inspection
Rear Suspension
Fasteners
-- III II
Steering Fasteners -- III IC
Suspension Shock Oil -- R
Cooling Fins and
Shroud
-- IIII
Drive Shaft Bearing 76 LLL I
Skags (Wear Bars) 101 III II
Ski Saddle/Spindle Bolts -- III II
Drive Chain Tension 85 III II
Hood and Side Panel
Fasteners
73 III II
Rear Wheel Idler Bolts 97 III II
Idler Bolt Jam Nut 97 III I I
Camber Alignment -- III
Handlebar Centering -- I
Tether Switch and Strap 54 III II
Track Alignment 98 III II
Track Tension 96 III II
Front Limiter Strap -- II I II
Rail Slide Condition 101 I
Chaincase Oil 75 IRI RI
Item Description
Engine Mounting Bolts Remove drive clutch and resonator for access to all bolts
Chaincase Mounting Bolts Two (2) TORX-head bolts on forward side of chaincase
Four (4) rear chaincase nuts

Polaris 800 PRO-RMK 2011 Specifications

General

Brand	Polaris
Model	800 PRO-RMK 2011
Category	Snowmobile
Language	English