32
FEATURES AND CONTROLS
Switches
Ignition Switch/Light Switch
Use the ignition switch to start the engine and to turn the lights on or off.
The key can be removed from the switch when it is in the OFF position.
OFF Turn the key to the OFF position to stop the engine.
Electrical circuits are off.
HEADLIGHTS
ON
The low beam headlights are on. Electrical circuits are on.
Electrical equipment can be used.
POSITION
LIGHTS ON
The low beam headlights are off. Positon lights are on.
Electrical circuits are on. Electrical equipment can be used.
START Turn the key to the START position to engage the electric
starter. See page 56 for starting procedures.
AWD Switch
12V Accessory
Outlet
Ignition Switch/Light
Switch
Instrument
Cluster
Hazard
Switch
OFF
START
HEADLIGHTS
ON
POSITION
LIGHTS ON
To Next Page
Loading...
