36
FEATURES AND CONTROLS
Park Brake Lever
Always apply the service brakes before engaging or releasing the park
brake. To help prevent the vehicle from rolling, set the park brake when
parking the vehicle. When the park brake is set and the park brake
indicator is illuminated, engine speed is limited. If the accelerator is
applied, this limiting feature prevents operation, which protects the park
brake pads from excessive wear.
Tip: This feature will not operate properly if the park brake connector or switch
(under the hood) malfunctions or becomes disconnected, or if the switch
has moved. Check for disconnection, then see your dealer promptly if this
feature fails to operate properly.
1. To set the park brake, apply the
brakes.
2. Pull the park brake lever
upward as far as possible.
3. To release the park brake, apply
the brakes. Press the park brake
release inward and move the
lever downward as far as
possible.
Park Brake Lever
Park Brake Release
To Next Page
Loading...
