137
TROUBLESHOOTING
Engine and Drive Train Troubleshooting
Harsh Drive Clutch Engagement
Possible Cause Solution
Worn drive belt Replace with the recommended belt.
Excessive belt/sheave clearance See your dealer.
Drive Belt Turns Over
Possible Cause Solution
Incorrect belt Replace with the recommended belt.
Incorrect clutch alignment See your dealer.
Broken or loose engine mount See your dealer.
Drive System Noise
Possible Cause Solution
Broken drive clutch components See your dealer.
Bearing failure (chaincase, jackshaft or
front drive shaft)
See your dealer.
Flat spots on drive belt surface Inspect and replace as needed.
Loose drive chain Inspect and adjust (or replace).
Worn drive chain/broken sprocket teeth See your dealer.
To Next Page
Loading...
