AUTOMATIC TRANSMISSION GEAR SELECTOR
The transmission gear selector
q
is
located on the right side of the vehicle.
• F: Forward
• N: Neutral
• R: Reverse
To shift gears, brake to a complete stop.
When the engine is idling, move the
lever to the desired gear.
Whenever the ATV is left unattended,
always place the transmission in gear
and lock the parking brake.
NOTICE
Shifting gears with the engine speed above idle or while the vehicle is moving
could cause transmission damage.
THROTTLE LEVER
WARNING
Operating an ATV with sticking or improperly operating throttle controls could
cause an accident and lead to severe injury or death.
Never start or operate an ATV with a sticking or improperly operating throttle.
Always contact your dealer or other qualified person for service if throttle
problems arise.
Failure to check or maintain proper operation of the throttle system can result
in an accident if the throttle lever sticks during operation. Always check the
lever for free movement and return before starting the engine. Also check
occasionally during operation.
The Electronic Throttle Control (ETC) stops the engine in the event of a throttle
system malfunction. Modifications to the electronic throttle control could result
in failure to perform as designed, which could result in an accident. Do not
attempt to modify the ETC system or replace it with any after market throttle
mechanism. Always ensure that the throttle cable is installed and properly
routed to the throttle control.
28
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
