EasyManuals Logo
Home>Polaris>Offroad Vehicle>Phoenix 200

Polaris Phoenix 200 User Manual

Polaris Phoenix 200
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
ENGINE OIL
OIL RECOMMENDATIONS
Always check and change the engine oil at the intervals outlined in the Periodic
Maintenance Chart section. POLARIS recommends the use of POLARIS PS-4
Extreme Duty 10W-50 4-Cycle Oil for this vehicle. Oil may need to be changed
more frequently if POLARIS oil is not used. Do not use automotive oil. See page
93 for the part numbers of POLARIS products.
NOTICE
Mixing brands or using a non-recommended oil may cause serious engine
damage. Always use the recommended oil. Never substitute or mix oil brands.
OIL SPECIFICATIONS
Lubricant
Capacity Drain Plug Torque
PS-4 Extreme Duty
10W-50 4-Cycle Oil
41 oz. (1200 ml) 11 ft. lbs. (15 Nm)
OIL CHECK
Maintain the oil level within the safe range on the dipstick. Do not overfill.
TIP
A rising oil level between checks in cool weather driving can indicate
contaminants such as gas or moisture collecting in the crankcase. If the oil
level is over the full/safe mark, change the oil immediately.
1. Position the vehicle on a level surface.
2. View the oil level through the sight glass
q
on the right side of the vehicle.
54
MAINTENANCE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Phoenix 200 and is the answer not in the manual?

Polaris Phoenix 200 Specifications

General IconGeneral
BrandPolaris
ModelPhoenix 200
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals