EasyManua.ls Logo

Polaris RANGER 500 EFI 4X4 2011 - Mode Button

Polaris RANGER 500 EFI 4X4 2011
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
FEATURES AND CONTROLS
Console
Mode Button
The yellow button located near the instrument cluster is used to toggle
through mode options available. See pages 33-36.
Gear Selector
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
Low gear is the primary driving
range for the RANGER. High gear
is intended for use on hard-packed
surfaces with light loads.
Whenever the vehicle is left unattended, always place the transmission
in PARK.
To change gears, stop the vehicle, and with the engine idling, move the
lever to the desired gear. Do not attempt to shift gears with engine speed
above idle or while the vehicle is moving.
Tip: Maintaining shift linkage adjustment is important to assure proper transmis-
sion function. See your dealer if you experience any shifting problems.
NOTICE: Do not attempt to shift the transmission while the vehicle is moving or
damage to the transmission could result. Always shift when the
vehicle is stationary and the engine is at idle.
Gear Selector

Table of Contents

Related product manuals