41
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 25
86
Brake fluid Ensure proper level 86
Park gear Ensure vehicle does not roll when in
PARK. Ensure PARK light illuminates.
-
Front suspension Inspect, lubricate if necessary 63
Rear suspension Inspect, lubricate if necessary 63
Steering Ensure free operation 87
Tires Inspect condition and pressure 7
88
Wheels/fasteners Inspect, ensure fastener tightness 88
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 29
65
Coolant level Ensure proper level 75
76
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 84
Indicator lights/switches Ensure operation 24
Air filter, pre-filter Inspect, clean 80
Air box sediment tube Drain deposits whenever visible 80
Headlamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
90
Brake light/tail lamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
91
Seat Belts Check length of belt for damage,
check latches for proper operation
27
Cab Nets Check for wear or damage, ensure
proper installation
28
To Next Page
Loading...
