5.5
BODY / SUSPENSION / STEERING
5
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
4. Using a 6 mm Allen socket, remove the (4) bolts
retaining the front cab frame to the rear cab frame.
5. Remove the (2) fasteners retaining the front cab frame
to the main frame. Note the orientation of the (4)
spacers during removal.
6. Carefully remove the front cab frame from the vehicle.
7. Remove the (2) screws retaining the choke bracket.
8. Disconnect the indicator lights and key switch harness
connections under the dash as shown.
9. Remove the front cab from the vehicle.
10. Reverse this procedure to reinstall the front cab.
Tighten all fasteners securely.
11. Torque the cab frame bolts and fasteners to
specification.
Body Component Fasteners:
16 in-lbs (1.8 Nm)
Cab Frame Fasteners:
20 ft-lbs (27 Nm)
To Next Page
Loading...
