8.7
ELECTRICAL
8
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
TRANSMISSION SWITCH
Transmission Switch - Circuit Breakout
Testing
1. With the switch installed, use an ohmmeter to test
continuity between the switch leads and engine
ground.
2. First, shift the transmission into “neutral” and test for
continuity between the DG/WH wire and ground.
3. Then shift the transmission into “reverse” and test for
continuity between the DB wire and ground. In both
tests you should have continuity to ground.
To Next Page
Loading...
