Polaris RANGER RZR 170 - Chapter 3; Engine Torque Specifications; Tools; Torque Specifications

3.3
ENGINE
3
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
TOOLS
Special Tools
SPX Corp: 1-800-328-6657 or http://polaris.spx.com/
TORQUE SPECIFICATIONS
Engine Torque Specifications
PART NUMBER TOOL DESCRIPTION
2870390 Piston Support Block
PA-45153 Flywheel Puller
PA-49959
Transmission Output Shaft
Collar Tool
PA-47344
Balance Shaft Slotted Nut
Socket
PA-49935
Crankshaft Slotted Nut
Socket
PA-49936
Flywheel Puller Adaptor
(Use with PA-45153)
TORQUE SPECIFICATIONS
Fastener
Thread
Size
ES35C
ft-lbs (Nm)
Camshaft Chain Guide
Pivot Bolt
6mm 5-7 (7-9 Nm)
Camshaft Chain
Tensioner
6mm 5-7 (7-9 Nm)
Chain Tensioner Cap 6mm 5-7 (7-9 Nm)
Carburetor Intake 6mm 7-8 (9-11 Nm)
Cylinder/Head Nuts 10mm 18 (25 Nm)
Cylinder Base Screws 6mm 5-7 (7-9 Nm)
Crankcase (inner) 6mm 14-15 (19-21 Nm)
Crankshaft Slotted Nut 14mm 43 (58 Nm)
Balancer Shaft Nut 14mm 43 (58 Nm)
Exhaust Nuts 6mm 7-8 (9-11 Nm)
Flywheel Nut 14mm 43 (58 Nm)
Cooling Fan 6mm 4-5 (5-7 Nm)
Oil Drain Bolt 14mm 18 (25 Nm)
Oil Pump 
Screws
6mm 4-5 (5-7 Nm)
Oil Pump Sprocket Nut 6mm 7-8 (9-11 Nm)
Oil pump baffle plate 6mm 4-5 (5-7 Nm)
Stator Assembly 6mm 7-8 (9-11 Nm)
Stator Housing 6mm 7-8 (9-11 Nm)
Valve Cover 6mm 7-8 (9-11 Nm)
Valve Adjuster Lock Nut 5mm 4-5 (5-7 Nm)
Starter Motor 6mm 5-7 (7-9 Nm)
Spark Plug 12mm 11 (15 Nm)
Pulse Coil Screws 5mm 4-5 (5-7 Nm)